Skip to content
Toggle mobile menu
Need Help? Call Us!
Card Readers / Keypads
Deadlatch Locks / Paddles
Push / Touch Sense Bars
Request To Exit / Door Release Buttons
Request to Exit Motion
Faceplates & Accessories
Norton Door Closers / Accessories
Camera / NVR / DVR Kits
Encoders / Decoders
NVR / DVR
Modular Inserts & Faceplates
Powerline Adaptor / WAP / Bridges
Power Supply Boards
Wall Mount Power Supplies
UPS Battery Backups / Surge Protection
Wire & Cable
Fire Alarm Cable
RG59 & 18/2 Siamese
Access Control Wire
Fire Alarm Cable
Hardware & Accessories
Login / Register
Customer Credit Application
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
ALTRONIX AL600ULACM Access Power Controller w/ Power Supply/Charger
Quantity in Stock:2
Input 115VAC 60Hz rated @ 3.5.
Power supply input options:
A) One (1) common power input for ACM8/ ACM8CB and lock power factory installed).
B) Two (2) isolated power inputs- One (1) to power the the ACM8/ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10A total).
Eight (8) Access Control System trigger inputs.
A) Eight (8) normally open (NO) inputs.
B) Eight (8) open collector inputs.
C) Any combination of the above
12VDC or 24VDC @ 6A supply current.
Eight (8) independently controlled outputs.
A) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
B) Eight (8) form "C" 5A rated relay outputs
C) Any combination of the above.
Eight (8) auxiliary power outputs (unstitched)
Fuses are rated @ 3.5A.
Filtred and electronically regulated outputs (built-in power supply).
ACM8 board main fuse is rated at 10A.
AC fail supervision (form "C" contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery and battery presence supervision (form "C" contact).
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
Fire Alarm disconnect input options:
A) Normally open (NO) or normally closed (NC) fry contact input.
B) Polarity reversal input from FACP signaling circuit.
Alarm output relay indicates that FACP input is triggered (form "C" contact rated @ 1A 28VDC).
Short circuit and thermal overload protection.
AC fail supervision (form "C" contact).
Red LEDs indicate outputs are triggered (relays energized).
Green LED indicates FACP disconnect is triggered.
AC input and DC output LED indicators.
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Zero voltage drop when unit switches over to battery backup (AC failure condition).
Battery fail and battery presence supervision (form "C" contact).
Operating: 0° C to 49° C (32° F to 120° F).
Storage: -20° C to 70° C (-4° F to 158° F ).
Relative Humidity 85% ± 5%.
12VDC: 37 BTU/Hr.
24VDC: 74 BTU/Hr.
ALTRONIX AL400ULACM Access Power Controller w/ Power Supply/Charger
SECURITRON BPS-12/24-1 Dual Voltage Boxed Power Supply
PREFERRED POWER PRODUCTS P3MPOE16-15 16 Port POE Mid-Span
ALRONIX SAV9D CCTV Power Supply
PREFERRED POWER PRODUCTS P3DC12-8-5W CCTV POWER SUPPLY
ALTRONIX SAV18D CCTV Power Supply
UNV PWR-DC5611-NB 60W PSE
MINUTEMAN MMS780R 8-Outlet/6-Rotating Outlet Surge Protector
Share your knowledge of this product.
Be the first to write a review »