Home > Products > Access Control >

New! 

ADAMS RITE 7130-510-628-00 Electric Strikes for Deadlatches and Cylindrical Locks

7130-510-628-00


 

MSRP: (Members Only)

Stock Status:In Stock

Product Code: 7130-510-628-00
Qty:

Description
 
Features:
  • Clear Anodized finish
  • Case: 1" x 3-3/8" x 1-5/8" deep [25.4 mm x 85.7 mm x 41.3 mm deep].
  • Strike Opening: 5/8" x 1-7/16" x 1/2" deep [15.9 mm x 36.5 mm x 12.7 mm deep]. Bolt retaining keeper is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
  • Strike Lip: Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
    • Lip extension kits not available on 7101 or 7131.
  • Latchbolt Projection: 1/2" to 5/8" [12.7 mm to 15.9 mm]
  • 1-1/4" x 6-7/8" [31.8mm x 174.6mm] flat with radius corners
  • 7130/7131: Large 6-7/8" faceplate is designed to cover strike opening when converting from an MS® pivoted-bolt deadlock to deadlatch.
  • Standard Package: Individually boxed with mounting screws, mounting clips, adhesive shims toaccommodate jamb or stile extrusion thickness greater or less than nominal 1/8" [3.2 mm].
    7140 Includes mounting clips and adhesive shims for use where welded tabs are omitted.
  • Voltage: Available in 12, 16, or 24 Volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.
  • Fail Safe | Fail Secure: Field selectable at time of installation. However, AC intermittent solenoid must not be used continuously in either.

Share your knowledge of this product. Be the first to write a review »